Easy Way to Replace AirTag Battery

Replacing the AirTag battery is perhaps a trivial thing that many users usually forge though it looks trivial, it turns out that changing AirTag batteries regularly can prevent you from losing them.

Especially if the battery on your AirTag runs out when you lose something valuable. Of course, you will no longer be able to track lost items because your AirTag runs out of battery and cannot be tracked.

You don’t need to worry, because how to replace the battery for this tracking device made by Apple is very easy. However, it would help if you understood a few things before changing the AirTag battery.

What kind of battery should be used?

You should know that this tool uses a standard-type CR2032 lithium battery. You can find this type of battery in electronics stores with various brands such as Energizer, Panasonic, Camelion, Sony, Maxell, etc.

These CR2032 lithium batteries usually come in sizes 20mm x 3.2mm and are round like a coin. These batteries typically have a capacity of 220mAh and a voltage of 3V.

Even though it looks small, this battery can last a year with normal use. But sometimes the length of the battery replacement cycle makes us complacent and forget not to replace it.

Therefore, make sure you have prepared this type of battery before replacing the old AirTag battery.

How to check AirTag battery will run out?

You can check the battery status of your AirTag anytime and anywhere using the Find My application from your iPhone. This application will give notifications automatically when the battery runs out as shown below.

The battery on the AirTag will still have power for some time after receiving the notification. However, it would be better if you replace it immediately to avoid the risk of running out of battery at an inopportune time.

You can also check it directly by opening the Find My application, then clicking the AirTag on the items tab in the application. If there is a “Low Battery” warning, then that’s the right time for you to replace the battery.

How to replace the AirTag battery?

This is how to replace your low-battery AirTag. Always make sure you replace it slowly and carefully as there are many sensitive components in it.

  1. The first step to take is to place the AirTag on your palm facing downwards.
  2. Gently press down on the metal back with two fingers counterclockwise.
  3. When the back has been released, put the part on the side.
  4. After that, remove the old battery and replace it with a new battery (make sure the + sign is facing up).
  5. Once the battery is installed, replace the battery cover by aligning the three tabs on the cover to the three AirTag holes.
  6. Place two fingers and rotate clockwise until the cover snaps into place (turn until it clicks).

Read Also: Live Activities iOS 16 For Football Live Score

If you have successfully replaced the battery, the AirTag will sound, indicating that the battery is properly installed. After making the switch you will usually be asked to reconnect the AirTag with the iPhone.

Take it easy, you won’t be asked to start from the beginning because your iPhone immediately recognizes the previous settings. So, that’s an easy way to replace the AirTag battery.

Leave a Comment

Exit mobile version